H3Stuff Store Transition & Production Delays After Hurricanes
H3Stuff • October 25, 2024

To our H3Stuff Community,


First and foremost, we want to express our sincere gratitude for your continued support and patience. Our team is still in the process of recovering from the two hurricanes that recently impacted our city in Florida. As many of you may have noticed, our Etsy store has remained in vacation mode since Hurricane Milton.


Unfortunately, the hurricanes caused significant damage to our factory, and while they are working tirelessly to restore operations, we have some unfortunate news. The production of our new H3 bezels has been delayed by about another month due to the setbacks.


At the moment, we only have the H3 Headlight Adapters in stock. The factory estimates that it will take roughly a month before we have the Version 2 Fog Light Adapters or Headlight Bezels available again.


Given that our Etsy store has been inactive since Hurricane Milton, we decided it was the perfect time to move forward with a change we had already been planning—transitioning to our own online store. This will help us avoid Etsy’s high fees (sometimes up to 23%) and allow us to continue offering our products at more cost-effective prices for the community.


As we transition away from Etsy and prepare to close our Etsy shop, we will unfortunately lose all of the reviews and feedback we’ve built up over time. These reviews have been vital in establishing transparency and trust within the Hummer community, and we believe they play a crucial role in helping other members make informed decisions.


Therefore, we are kindly asking anyone who has purchased our Hummer adapters—over 105 of you!—to leave us a review in the *Reviews* section of this Facebook page. It would mean the world to us and help fellow Hummer enthusiasts greatly. You can even add photos and videos to showcase your experience. In today’s world, these reviews have a greater impact than you might realize.


As a token of our appreciation, anyone who leaves a verified review (for a product you’ve purchased from us) will receive a coupon code for 10% off your next order (up to $200) on our new store.


Thank you again for your unwavering support in this incredible community. We look forward to continuing to serve you!



Warm regards, 

The H3Stuff Team

Weekend Wrenching: Metal Bezels Nearing the Finish Line

By H3Stuff • April 20, 2025
Weekend Grind – Metal Headlight Bezel Update Spent some solid time this weekend with the H3, finally getting the metal headlight bezels mounted and tuned… damn near perfect. The cutoff wheel earned its paycheck, and then we brought the truck to the shop where our designer dialed in the CAD measurements—hours of tweaks, but we got the numbers locked in. We know these metal bezels have been a long time coming. Life hit us with the need for some personal downtime, and we appreciate everyone sticking with us. Thank you. Truth is—these aren’t easy to make. We’re not stamping these with some mass-production die. We’re working with raw metal, angles, welding… old school. It would be way easier to just 3D print them. But these trucks? They deserve better. They deserve rugged. And that’s why we’re committed to doing it the hard way—the right way. If all goes well, these latest first article prototypes will go through a final test fit in the next couple weeks. After that? Full production. Thanks again for all the support. It means more than you know.  – The H3Stuff Team

Big Update: V2 Adapters Approved, Metal Bezels Enter Final Stage 🔧

By H3Stuff • April 14, 2025
Hey guys, I know it’s been a while, but I wanted to give a quick update on what’s going on with h3stuff.com. We just approved the final design for the Version 2 fog light adapters. These are completely redesigned and no longer have that annoying gap—so when you install them, it’s one solid piece. The fog lights fit cleanly into the opening with no hole between the bumper and the light. Pics are included so you can check out the fitment. Also, as of today, we’re moving forward on the metal bezels. We’ve been dialing these in for about six months now, trying to get every detail right. They head back to the factory next week for one final pre-run to confirm fitment. If all goes well, they’ll hit the market in about a month. These bezels are made to fit directly over the current H3 headlight adapters, locking together into a tight, clean two-piece system. Thanks for hanging in there with us. We’ve been keeping an eye on the discussions in the other Hummer Facebook group and we’ve seen the questions—so if you’ve got more, hit us up. We’re here. We know it’s taken longer than anyone wanted. But these are solid metal parts—no shortcuts, no cheap plastic—and getting them right means rounds of revisions and a whole lot of back-and-forth with the factory.  Bottom line—we’re the only ones in the world making solid metal brackets for Hummer H3 headlights and fog lights. No compromises. Built right, or not at all.

Still Here, Still Shipping – Quick H3 Update

By H3Stuff • April 8, 2025
Hey everybody - just wanted to drop a brief update to tell y’all that we’re still around and are sending out products several times a week. We know there has been a slow down from us, as we had to battle some personal issues over here. The metal shrouds are still in the making, and we have a couple new products in the works. Thanks again for all of your support